GPS Tracker for Vehicles - G500M Safety Real Time OBD

Disassembly alarm, vibration alarm, continuous alarm, overspeed alarm, motion alarm.
There is smart mode, low power consumption, save power and GPS costs.
Free installation, easy to use, just need to insert into the OBD interface of the car, you can use it, not damage the original car line.

Start with:
1, Use the screwdriver to open the case.
2, inserted micro SIM card (support SIM card with mesh 2G)
3. Make sure the pen is fully connected to the top antenna metal before closing the cover.
In general, the OBD connector is located in the driver or passenger cab from the edge of the dashboard on the driver's side to the edge of 300 mm. It is easy to touch when you sit on the driver's seat.
Turn on the ignition to turn on the tracker. Then edit the following SMS command and send it to the SIM card number of the tracker. For each command successfully sent, the device responds with configure ok.

Specifications:
Material: ABS plastic
Colour: black
Dimensions: 50 mm x 38 mm x 25 mm.
OBD Connector: Support 16pin OBDII standard connector
Network: GSM / GPRS
Frequency: 850/900/1800/1900 MHz
GPS Chipset: High sensitivity MTK chip
GPS Channel: 66
G-sensor: Support
Geo fence: support.
Upload position for angle change: support
Ignition status detection: support.
Storage capacity: 1400 positions
Pack size: 110 x 80 x 50 mm / 4.33 x 3.15 x 1.97 inches.
Package weight: 100 g.

Note:
Does not contain SIM card. Please buy it

Package contents:
1 x GPS locator.
1 x removal tool.
1 x user manual.