1kg Coil Flux-cored Wire Without GaS Welding 1mm

self-small powder wire 1mm / kg E71T-GS is designed for welding ordinary carbon steel and increased strength not exceeding 510 MPa.

It is used in prefabrication, construction, tank production, agricultural equipment, etc. Used in both manufacturing and repair equipment.

Application of:

• Designed for all welding positions, single layer inguiment and butt welds, when welding automatically and semi-automatic.
• It can be used for aluminium and galvanized steels with a thickness of 1.2 – 5.0 mm.
• Developed for general use when there are no requirements for impact resistance.

Permissations of the following:

• A special
• Protective gas (EN ISO 14175):
• The self-salt wire

Obtained yield:

• 75 - 85%

The welding current:

• The (-)

Specifications:

Typical chemical composition of binder (%):

• C: 0,2
• Si: 0.3
• Mn: 1.0
• Al: 2.0

Typical mechanical properties of stops:

• Conditions of testing: EN
• Condition: TZ0
• Gas: - -
• Rm (MPa): 500
• ReL (MPa): 380
• A5 (%): >22
• KV (J)/C +20: >27

The technological parameters:

• - d(mm): 0.8
• Welding current (A): 40 - 100
• Arc voltage (V): 14 - 16
• Feeding speed (m/min): 3.0 - 7.0
• A melting capacity (kg/h): 0.4 - 2.6