WIRE WELDING 210A MIG Inverter Migomat, POWERMAT

semi-automatic welding machine POWERMAT uses modern IGBT transistors that provide a stable arc, high energy efficiency and resistance to interference.

This makes the device lighter, more economical and reliable in operation.

Model: PM-IMGTS-210L Power supply: 230 V / 50 Hz FCAW power consumption: 8.3 kVA TIG power consumption: 6.2kVA

MMA power consumption: 9.6kVA

Welding methods: FCAW FLUX/MMA/LFT-TIG FCAW welding current range 0.8: 30 - 210 [A]

FCAW welding current range 0.9: 50 - 210 [A] Welding current range: 20 - 210 [A]

TIG welding current range: 15 - 210 [A]

Welding current duty cycle 100%: (FCAW/TIG LIFT - 163A)

Turning current duty cycle 60%: (FCAW - 210 A) Driving current duty cycle 100%: (MMA - 163 A)

Duty cycle of the current welding cycle 60%: (MMA - 210 A)

Portable cable diameter: 0.8 / 0.9 [mm] - self-shield Supported electrode diameters: 1.6 mm - 4 mm FCAW

welding voltage: 15.5 - 24 [V]

MMA welding voltage: 20.8 - 28.4 [V] TIG welding voltage: 10.6 - 18.4 [V

] Operating modes: cooperative Handled cable rods: maximum up to 1 kg

Insulation class: F Mains fuse: 20 A Degree of protection: IP21

Dimensions: 36x17x29 [cm] (length / width / h) Net weight: 5.4 kg CONTENTS OF SET

Mass handle (-): 200 cm MMA electrode handle (+): 210 cm / plug 8m 16-25 welding handle (for wire): 220 cm Current tips: 2x 0.9; 1x 0.8 [mm] roll (straight)

supporting wire: 0.8 mm and 0.9 mm type Soldering mask brush with a hammer Self-fluxing wire (flux) type E71T-GS 0.8 mm - 0.45 kg

User manual in Polish The universal key The original packaging