AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINO
AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINO
AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINO
AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINO
Previous
Next

AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINO

Референция: OLIMEXINO-32U4
16,00 €
13,00 €
с ДДС

FEATURES

  • ATMEGA32U4 microcontroller, all in one USB communication no need for external FTDI chip.
  • Input power supply 7-12VDC
  • ULTRA LOW POWER voltage regulators and the consumption is only few microamps, which enables hand-held and battery powered applications.
  • Li-Ion rechargeable battery power supply option with a BUILD-IN on board charger, so when you attach a battery, it is automatically charged and kept in this state until the other power source (USB or external adapter) is removed and it will AUTOMATICALLY power the board - no jumpers, no switches!
  • Works both on 3.3V and on 5V which can be selected with a jumper, so 3.3V and 5V shields can be used
  • UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
  • Allows real-time clock (Q1 can be replaced by RTC).
  • NOISE IMMUNE design
  • the LEDs and the button BUT are on the edge of the board so there is easy access even if the boards have shields on them
  • All of the components are LOWER than the connectors, so that the shields don't interfere with them
  • A Mini USB connector is used, which is common and used in most cell phones, so you do not have to buy other cables
  • Original design had a flaw - the connectors were not spaced at 0.1" which made bread board use impossible, to keep the compatibility we have the original spacing but we also added a 0.1'' connector which customer can use with bread boards (and jumper wires) saving the hustle of soldering
  • All signals on the connectors are printed on the top of the board, so when you check with a probe you will know exactly which port you are measuring
  • 4 mount holes make board attachment easier

DOCUMENTS

HARDWARE

SOFTWARE

COMMUNITY

FAQ

  • I can't find compatible drivers in the latest 1.0.1 Arduino IDE/drivers folder. What should I do?
  • You have to program the board with the latest bootloader available.
  • I installed version 1.0.0 of Arduino IDE but I can't find Leonardo under boards
  • Un-comment the Leonardo section in the "hardwarearduinoboards.txt" file in your Arduino IDE install location
  • I disabled all interrupts and entered an infinite loop code on my board and now the bootloader won't start. How do I start it?
  • You need a programmer to program the bootloader again. Avoid disabling interrupts at all costs.
OLIMEX
OLIMEXINO-32U4

Данни за продукта

OLINUXINO - PINGUINO
DUINO - PINGUINO
Коментари (0)
В момента няма отзиви от клиенти.