OLIMEXINO-32U4 AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINOΡΟΜΠΟΤΙΚΗ
OLIMEXINO-32U4 AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINOΡΟΜΠΟΤΙΚΗ
OLIMEXINO-32U4 AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINOΡΟΜΠΟΤΙΚΗ
OLIMEXINO-32U4 AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINOΡΟΜΠΟΤΙΚΗ
Previous
Next

AVR ΜΕ ΜΙΚΡΟΕΠΕΞΕΡΓΑΣΤΗ ATMEGA32U4 LIKE ARDUINOA

Κωδικός: OLIMEXINO-32U4
16,00 €
13,00 €
με ΦΠΑ
ΑΜΕΣΑ ΔΙΑΘΕΣΙΜΟ

FEATURES

  • ATMEGA32U4 microcontroller, all in one USB communication no need for external FTDI chip.
  • Input power supply 7-12VDC
  • ULTRA LOW POWER voltage regulators and the consumption is only few microamps, which enables hand-held and battery powered applications.
  • Li-Ion rechargeable battery power supply option with a BUILD-IN on board charger, so when you attach a battery, it is automatically charged and kept in this state until the other power source (USB or external adapter) is removed and it will AUTOMATICALLY power the board - no jumpers, no switches!
  • Works both on 3.3V and on 5V which can be selected with a jumper, so 3.3V and 5V shields can be used
  • UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected
  • Allows real-time clock (Q1 can be replaced by RTC).
  • NOISE IMMUNE design
  • the LEDs and the button BUT are on the edge of the board so there is easy access even if the boards have shields on them
  • All of the components are LOWER than the connectors, so that the shields don't interfere with them
  • A Mini USB connector is used, which is common and used in most cell phones, so you do not have to buy other cables
  • Original design had a flaw - the connectors were not spaced at 0.1" which made bread board use impossible, to keep the compatibility we have the original spacing but we also added a 0.1'' connector which customer can use with bread boards (and jumper wires) saving the hustle of soldering
  • All signals on the connectors are printed on the top of the board, so when you check with a probe you will know exactly which port you are measuring
  • 4 mount holes make board attachment easier

DOCUMENTS

HARDWARE

SOFTWARE

COMMUNITY

FAQ

  • I can't find compatible drivers in the latest 1.0.1 Arduino IDE/drivers folder. What should I do?
  • You have to program the board with the latest bootloader available.
  • I installed version 1.0.0 of Arduino IDE but I can't find Leonardo under boards
  • Un-comment the Leonardo section in the "hardwarearduinoboards.txt" file in your Arduino IDE install location
  • I disabled all interrupts and entered an infinite loop code on my board and now the bootloader won't start. How do I start it?
  • You need a programmer to program the bootloader again. Avoid disabling interrupts at all costs.
OLIMEX
OLIMEXINO-32U4

Χαρακτηριστικά

OLINUXINO - PINGUINO
DUINO - PINGUINO
Σχόλια (0)
Δεν υπάρχουν κριτικές πελατών προς το παρόν.