Thermostat 230V STC-3028

Sensor humidity and temperature STC-3028 is a solution to use in many projects wherever humidity

and temperature control is necessary air at one time, e.g. in warehouses, production halls, dryers,

greenhouses or museums.

The controller has two LED displays 1 red on which displays the temperature

and 2 blue on which it is displayed humidity.

Over displays are placed LEDs whose light informs about the attached relay and therefore the work of the appropriate system.

The thermostat has the option of heating/cooling depending on configuration

as well as hygrometer dehumidification/irrigation function depending on from configuration.

Regulator temperature and humidity included with sensor powered by voltage 230V.

It has 2 readable displays: red responsible for temperature and blue indications showing humidity and rubber buttons for Changes in configuration. Above each display is a diode that shines when the temperature/humidity control device is activated.

In depending on the settings entered, the regulator can operate simultaneously in mode: heating/cooling and moisturizing/drying.

The device is very easy to configure, it can handle the connected devices (e.g. windmills, radiators, humidifiers, sprinklers, boilers)

with power not exceeding 2500W and maximum current consumption 10A for every channel.

The module has a memory of settings, power failure does not reset the entered values.

Integrated temperature sensor included and humidity on the 1m long wire.

It'll work to control temperature and humidity in:

• Terrarias

• cold stores

• halls industrial

• tunnels plants

• crops mushrooms

• dryers

Specification:

• Type: temperature and humidity controller

• voltage 230V AC power supply

• quantity channels: 2 (1 for temperature control, 2 for control humidity)

• maximum power of controlled devices: 2500W for each channel

• Maximum power consumption for each channel: 10A

• scope temperature measurement: -20 to 80°C

• scope humidity measurement: 0 to 100%RH

• humidity and temperature measurement resolution: 0.1

• accuracy temperature measurement +/- 1°C

• accuracy humidity measurement +/- 0.1%